This article mainly introduces the method of installing rubber sheet and rubber floor, which is applicable to various rubber sheets including silicone rubber sheet and butyl rubber sheet.
Handling the grassroots: Use the cement to smooth the uneven surface of the ground to keep the ground flat, hard, dry, free of oil and other impurities. Find the rules of the elastic line: In the room where the floor needs to be paved, play the centerline of the cross in the long and wide direction, and the ink line should be thin and clear. If the size of the rubber floor and the size of the room are not equal, add an edge line around the floor. Mixing Adhesive: Mix the special adhesive for rubber flooring according to the proportion. If you don’t know it, it is better to let the professional take charge. Clean up the rubber sheet: In order to ensure that the floor can be firmly adhered, remove the back of the packaged rubber sheet before applying the glue, and then use a clean cloth to clean the dust on the back of the floor. Start brushing: Brush a thin and even layer of primer on the floor. It should be noted that the proportion of the primer and the solvent-based diluent is the main proportion. Paving the rubber sheet: According to the size of the rubber sheet and the construction environment, choose a suitable paving method, the cross paving method and the diagonal diagonal paving method, and then start paving the floor in the correct order. Laying the rubber skirting board: After the floor is pasted, pop out the upper line of the skirting board, and then paste the skirting board at both ends of the room. It is very popular in paving. Pay attention to the rolling of the skirting board and the female corner of the skirting board and the ground. The brushed glue shall prevail and the glue marks shall be cleaned in time. Wax the floor: Finally, in order to protect the floor and make it last longer, you can apply a layer of floor wax to the rubber floor.