The main raw material is made of a special rubber material, all of which are solid, except for a small hollow to maintain the center of gravity. The tires made in this way can be used as anti-nails, bullet-proof, mine-proof, anti-burning bottles … well loved by police officers. However, solid tires are very bulky, and the handling is not very good after being installed in the car, so it needs to be further improved by professionals.
A solid tire is a type of tire that corresponds to a pneumatic tire (hollow tire). Its carcass is solid, no cord is used as a skeleton, no inflation is required, and no inner tube or inner liner is required. The earliest tires were solid tires. Solid tires are currently only used for low-load high-load vehicles or machinery, and also for fixed-location machinery.
Wear resistant tread compound
Resilient center compound
Steel ring reinforced
Solid tires have a long service life, low deformation rates, reduced vehicle maintenance costs, and increased driver comfort.
1. Excellent safety performance, which is conducive to improving work efficiency.
Because the solid tire carcass is made of full rubber, it can ensure the puncture resistance of the tire to the greatest extent, and fundamentally eliminate the hidden danger of puncture of the industrial vehicle during the load operation and in the harsh operating environment. The load of solid tires is small, the deformation is good, and the running stability is good. Because it is puncture-resistant and tear-resistant, it does not need to inflate, avoiding the heavy labor of frequent tire replacement and tire change, which can improve vehicle utilization and work efficiency, and run at low speed and efficiently In vehicles, solid tires can completely replace pneumatic tires.
2. Reasonable structural design to ensure that the tire has better performance.
3. Advanced technology and formula design. The advanced formula design reduces the rolling resistance of the tire.
4. Advantages in resolving tire slips, falling blocks, cracks, etc .:
① After the imported fiber rubber is used as the tire base rubber, the heat generating performance of the tire is improved, and the running heat of the tire is greatly reduced:
The solid tire and the rim are press-fitted together through an interference fit. Excessive heating of the carcass and expansion will cause the tire to slip. Fibre rubber has the advantages of good rigidity, high rigidity, good stiffness, small deformation, small expansion coefficient, and low heat generation. Therefore, the slip ring phenomenon caused by bulging in the hub caused by tire heat is fundamentally eliminated.
② The tire dropout and crack are caused by many factors. In addition to external factors such as hard injuries during use, the internal causes are mainly caused by rubber aging, and are mainly thermal aging and light aging. The use of fibrous rubber reduces the heat generation of the tire, thereby eliminating the occurrence of cracks and blockage caused by thermal aging damage to the rubber.
5. Impact on tire performance after structural changes
After the tire section is widened, the stability of the vehicle in operation is enhanced.
Solid tires are generally divided into two types: bonded and non-bonded. The former refers to tires with rubber directly vulcanized on the rim, and the latter refers to tires that are vulcanized and then fixed to the rim.
According to the shape, it can be divided into cylindrical solid tires and inclined bottom solid tires. According to the purpose, it can be divided into antistatic, conductive, oil-resistant, high-load solid tires, and environmentally friendly solid tires.
A special type of tire, mainly suitable for special vehicles such as anti-riot vehicles, banknote transport vehicles, anti-terrorist vehicles, engineering vehicles, forestry machinery and so on.
Solid tires are generally used under high load, which requires the rubber compound to have sufficient pressure resistance and abrasion resistance, high enough elongation stress, high hardness, low permanent deformation and good abrasion resistance.
Solid tire is an industrial tire suitable for running vehicles under low-speed, high-load and harsh use conditions. Its safety, durability and economy are significantly better than pneumatic tires. , Towing vehicles in ports and airports.
Telphone:+86.13012051391 E-mail:email@example.com Skype:jun.shi03
©2004-2020 esoo.org. All Rights Reserved.
© 2010-2019 Rogue Fitness. All Rights Reserved.