Good product, good way

Three-phase incoming reactor

The three-phase incoming reactor is an iron-core dry-type core using high-quality low-loss cold-rolled silicon steel sheets. After high-speed punching and punching, it has the characteristics of small burrs, uniform rules, neat and beautiful lamination, and low temperature operation and low noise. The reactor has the advantages of small size, light weight, beautiful appearance and convenient wiring.

Description

Working voltage: 3 * 380V / 500V
Working frequency: 50 / 60Hz
Rated current: 2.5A to 1100A @ 40 ℃
Impedance voltage drop: 2% -4% @ 400VAC, 50Hz & rated current
Overload capacity: 1.5 times of rated current for 1 minute, 2 times of rated current for 30 seconds
Electric strength: P-E3000VAC3S
Protection level: IP00
Insulation class: T40 / H (180 ° C)
Insulation resistance: 1000VDC insulation resistance value ≥100MΩ
Reactor noise: less than 70dB (tested at 1 meter horizontal distance from the reactor)

Definition

The three-phase incoming reactor is an iron-core dry-type core using high-quality low-loss cold-rolled silicon steel sheets. After high-speed punching and punching, it has the characteristics of small burrs, uniform rules, neat and beautiful lamination, and low temperature operation and low noise. The reactor has the advantages of small size, light weight, beautiful appearance and convenient wiring.

Features

1. Surge and peak current suppression

2.Improve the power factor

3.Improve the low-frequency conducted immunity

4. Prevent trips caused by power supply voltage spikes

5.Protect power electronic components of inverter, soft start, servo and governor

Function and role

1. The product is an iron core dry type core made of high-quality low-loss cold-rolled silicon steel sheet. After high-speed punching and punching, it has small burrs, uniform rules, neat and beautiful lamination, and low temperature operation and low noise.

2. The coil is made of high-quality insulated wire, which is wound by a special machine.

3. The iron core post is divided into uniform small pieces by multiple air gaps. The air gap uses high temperature and high strength connecting glue to tightly bond each small section of the core post with the upper and lower yoke.

4. During the assembly process of the reactor, all clips are treated with anti-corrosion. The key clips are made of non-magnetic material and pre-baked-

5.Vacuum immersion paint-heat-baking curing and other processes make the filter reactor coil and iron core firmly integrated, greatly reducing the temperature rise and noise during operation, and effectively improving the quality of the filter reactor.

6. Reactors have the advantages of small size, light weight, beautiful appearance and convenient wiring.

Image

 

 

 

Product knowledge

No Related Product knowledge!

Good Methods

No Related Good Methods!

Contact message