Steel: AISI / 304H / AISI 430 / AISI 204 / AISI 201 / AISI 304ES
Refill material:pure silicone or grade A rubber
Type:Wiper Blade wiper type:universal frame wiper blade colour:black warranty:6-12 months
Bone wipers are traditional wipers. The principle of the bone wiper is that the wiper blade is pressed on the glass through several support points on the skeleton, so that the pressure of each support point on the wiper blade is even.
In the process of use, because the pressure of each support point of the bone wiper is average, the degree of wear is also average, and the friction noise between the wiper blade and the glass is prone to occur, and it is not easy to scrape the impurities.
1. The order of traditional wiper power transmission is: main arm → main bead → secondary bead → holding bead → scraper The order of the power transmission of the boneless wiper is: tip → bracket → guide bar → scraper The difference between it and the boneless wiper is that the force is different: the traditional wiper has multiple pressure points, and the integrated steel sheet used by the boneless wiper has a uniform stress point.
2. When replacing a boneless wiper on a car, there is no need to replace the wiper arm; while replacing a bone wiper, a bone wiper needs to be replaced with the wiper arm.
1. The key to the good function of the wiper is that the rubber wiper strip can maintain sufficient wetness. Only with sufficient wetness can it have very good toughness to maintain tightness in contact with the window glass. It’s very simple. A piece of rice is dried on the bowl. If you don’t soak the rice, let alone wash the dishes, you just use a hard tool to scrape it. The same applies to the use of wipers. Many riders often complain that the wiper is not clean, which is the reason. 2. The wiper, as the name suggests, is used to wipe the rain, not to “mud”. Therefore, the correct use of wipers is not only to extend the life of the wipers, the key is to effectively maintain a good line of sight, which is more conducive to driving safety. After thinking about these two basic points, I know roughly how to use the wiper. 3. So if you do n’t have a garage, you should get into the habit of wiping the front window with a damp cloth before leaving the car every morning. Overnight, the wiper is dry. I want to use a wiper to clean the ash accumulated on the front window overnight when I leave the car. This kind of dry grinding is not only difficult to achieve good results, but also easily damage the wiper. The correct method is: after wiping the wet cloth, spray it with water again. Because good glass washing water is volatile, it can quickly dry the window surface, so as to avoid the wet glass from absorbing dust and mud. 4. If you have a garage, you should get into the habit of clearing the front window when returning to the garage every night. Especially after coming back from the rain, the water droplets accumulated on the front window, after drying in the morning to become water stains, and then participating in the dust absorbed in it, the front window is difficult to clean by rain alone. If the night before, use a wet wiper to wipe the front window clean. The next morning, I could drive on the road easily and cleanly. 5. Do n’t rush to open the wiper when the rain drops during driving. At this time, the water on the front window is insufficient, and the wiper wipes dry, which will only have the opposite effect. Scratched mud stains on the front window are still difficult to clean. If the raindrops accumulate slowly and do not affect the sight, it is best to wait until there is more raindrops on the front window before turning on the wiper. When using a wiper in a light rain, it is best to spray the glass washing water before you start scraping (the glass washing water can be used not only during parking, but also during driving). To ensure that there is enough water on the front window to moisten the wiper. 6. It is best to use the second gear of the wiper blade for continuous back and forth scraping. Some riders like to use the intermittent mode to scrape during light rain, which is not good. Driving on the road is not only necessary to prevent rain from the sky, but also to prevent mud and water splashing from the car in front. In this case, the intermittent mode can easily scratch the front window into a muddy pattern, which seriously affects sight. 7, rain stopped on the road, do not rush to close the wiper. The reason is the same as above, when the front window is splashed with mud ideas brought by the front car, and then the wiper is opened in a hurry, then it becomes scraping mud.