Natural Rubber+IRON+PLASTIC CLIP
Type:Wiper Blade Car Make:CUSTOM-FIT TYPE Material:Natural Rubber+IRON+PLASTIC CLIP Color:black
Frameless wiper is a type of wiper. The wiper is also called wiper, wiper, wiper or windshield wiper. It is a device used to wipe off raindrops and dust attached to the windshield of the vehicle to improve the driver. Visibility and increase driving safety.
1. Very easy to change the adapters
2. Integrated appearance, very beautiful
3. Upgradeable, more functions are adding
4. Both ends of the card cover fixed tape,rubber refill will not fall off
5.SPSN process tape, to extend the service life
6.High quality steel sheet, good toughness, strong recovery, to ensure the stability of the wiper
7.Special connector, stable and solid,Easy installation,100% fit.
8.Manufacturing process and product consistent and flexible
9.Dynamic Design:The pressure is more uniform,Scratch test better,Close with the glass.
10.Interface Buckle:the base is a space zinc alloy interface,material stable and solid.
11.All season performance:Safety Cleanliness Silence.
Frameless wiper is composed of motor, reducer, four-link mechanism, wiper arm mandrel, wiper blade assembly, etc., and its main function is to remove rain and snow and dust on the windshield that obstruct sight.
The power source of the wiper is the electric motor, which is the core of the entire wiper system. The quality requirements for wiper motors are quite high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm and worm mechanical part. The function of the worm gear and worm gear is to reduce the speed and increase the torque. The output shaft drives the four-link mechanism. The four-link mechanism changes the continuous rotary motion into a left-right swing motion.
The wiper motor uses a 3-brush structure to facilitate speed changes. The intermittent time is controlled by an intermittent relay, and the wiper wiper is wiped according to a certain period by using the charging and discharging functions of the return switch contacts of the motor and the resistance and capacitance of the relay. The wiper blade of the wiper is a tool to directly remove rain and dirt from the glass. The scraper rubber strip is pressed against the glass surface by the spring strip, and its lips must match the angle of the glass to achieve the required performance.
Under normal circumstances, there are wiper control knobs on the handle of the car combination switch, which are equipped with low, high and intermittent gears. At the top of the handle is a button switch of the scrubber. When the switch is pressed, washing water is sprayed out, and the windshield is washed with the wiper. The scrubber system is a very common device on automobiles. It consists of a water storage tank, a pump, a water pipe, and a water nozzle. The water storage tank is generally a plastic tank of 1.5 liters to 2 liters. The water pump is a miniature electric centrifugal pump, through which the washing water of the water storage tank is sent to the water nozzle, and the squeezing effect of 2 to 4 water nozzles The washing water is divided into small jets and sprayed onto the windshield, which works with the wiper to clean the windshield.