The edge banding machine is a kind of automatic edge banding program instead of manual conveying: conveying-gluing and bonding-cutting-front and back flushing-trimming up and down-trimming up and down-scraping up and down-polishing and highly automated The machines are mainly divided into semi-automatic and portable. Edge banding machine is a kind of woodworking machinery. Edge banding machine is a kind of woodworking machinery. It belongs to solid wood machinery. Edge banding machine is used for edge banding as the name suggests. The traditional manual operation process is completed with highly automated machinery. Including conveying in the face-shaped special-shaped edge banding—gluing and bonding—cutting—front and back flushing—up and down trimming—up and down trimming—up and down scraping—polishing and so on.
Fully automatic Features This machine is suitable for linear edge trimming and trimming of medium-density fiberboard, blockboard, solid wood board, particle board, polymer door panel, plywood, etc. It can have double-sided glued edge banding, cutting edge banding, bonding and compression, Flush, chamfer, rough, fine Features such as scraping and polishing, the edges are delicate, smooth, feel good, and the sealing line is straight and smooth. The equipment is stable, reliable, durable, and affordable. It is especially suitable for large and medium-sized furniture, cabinets and other panel furniture manufacturers.
semiautomatic Use of edge-sealed hot melt adhesive 1: Temperature of semi-automatic edge banding machine Because the performance of edge-sealing hot-melt adhesives is affected by temperature, temperature is a very important indicator in the process of edge-sealing. The temperature of the hot-melt adhesive, the temperature of the substrate, the temperature of the edge-sealing material, and the temperature of the working environment (the workshop where the semi-automatic edge-sealing machine is located) are all very important edge-sealing parameters. On the semi-automatic edge banding machine, because the glue is coated on the substrate, the substrate with too low temperature will cause the hot melt adhesive to cure in advance, which will cause the glue to stick to the substrate, but it will not stick to the edge banding material. It is best to keep it above 20 ° C. The working temperature of the semi-automatic edge banding machine will affect the curing speed of the glue. Plants often have edge-sealing problems in low-temperature seasons. The reason is that the curing speed of hot-melt adhesives is accelerated at low temperatures and the effective time for bonding is shortened. If the feeding speed of the semi-automatic edge banding machine cannot be changed (in most cases), to ensure the quality of the edge band, the sheet and the edge banding material must be preheated.
2.Semi-automatic edge banding machine processing The glue line between the edge-sealed board and the edge-banding belt will adversely affect the appearance of the panel furniture. If the amount of glue applied is too large, the glue line will be obvious. Otherwise, the edge sealing strength will be reduced. For the discontinuous or uneven rubber line phenomenon, there are many reasons. The following factors must be considered comprehensively: the accuracy of the material opening, the edge of the plate must maintain a 90 ° angle with its plane; edge banding machine Whether the pressure of the pressure roller is evenly distributed and the size is correct, and the pressure direction should be 90 ° with the edge of the board; whether the glue roller is intact, whether the hot melt adhesive is even on it, and the amount of glue is appropriate; In a clean and dust-free place, avoid contact between dirty and glue lines during the finishing process. The semi-automatic edge banding machine is suitable for the linear edge banding of medium density fiberboard, blockboard and particleboard. It can complete the automatic production line of edge banding, belt feeding, upper and lower milling and polishing at one time.
Portable edge banding machine First of all, it can be directly applied to the edge banding operation of plate linear and curved irregular frame. When the portable woodworking edge banding machine is installed with the fixed bracket accessories, its use is similar to that of the traditional curved straight edge banding machine. Edge banding for various materials: such as melamine (impregnated) paper, veneer, plastic (PVC or ABS), etc. The portable woodworking edge banding machine has the following advantages: streamlined, light, high quality and good price.
Curved edge banding machine The edge banding machine has the difference between a curved edge banding machine and a linear edge banding machine. The curved edge banding machine is a manual edge banding machine, and the linear edge banding machine is a fully automatic edge banding machine. From the perspective of market demand, the manual type is more suitable for small and medium-sized furniture factories. It is low in price, convenient to operate, and easy to maintain. It is divided into two types according to its manufacturing principle: the upper and lower tanks. The former is driven from top to bottom. The plastic tank is on the top, the latter is driven from bottom to top, and the plastic tank is on the bottom. The former is followed by the latter, which are characterized by: 1. Don’t leak glue. Due to the transmission of the lower plastic tank, the leakage of the seal will be caused after the seal ring is damaged, which will affect the normal operation of the machine. There are no glue leaks in the gluing tank. 2. The sol does not age. The lower glue tank has the problem that the residual glue is repeatedly heated and aged to affect the bonding quality. The sol in the upper glue tank oozes from top to bottom without precipitation and residue. 3. Easy to clean. Regular cleaning of the machine, the upper plastic tank is more convenient than the lower plastic tank, and can even be cleaned without stopping, without affecting production. 4, less failures. It is easy to refuel the upload gear and reduce malfunctions.