The granulator is used to develop the wet powder into the required particles, and it can also pulverize the dry block material into the required particles. The main feature is that the screen is easy to assemble and disassemble, and the elasticity can be adjusted appropriately, which is convenient for disassembly and easy to clean.
1. Adopt conical pressing wheel, and the two ends have linear velocity with the inner and outer circle of the die plate. There is no misaligned friction between the wheel and the die, which reduces resistance, reduces kinetic energy loss, prolongs the service life of the die, and reduces production costs. .
2. The granulating room is equipped with three observation doors, and the materials are cleaned at any time and the equipment is maintained. Third, the pressure rollers are evenly distributed, and the operation is stable, which increases the pressing area and improves production efficiency. Fourth, the screw stalk center pressure regulating structure is adopted, and the die gap is increased and decreased to adapt to different materials and pressed.
3. The machine is strong and powerful, easy to operate, stable in operation, and has a large bucket. The rotating drum is made of stainless steel to ensure the quality of the treated material is clean and not discolored. 4. The mesh size of the mesh sieve should be prepared by the user according to the particle size requirements. Its device is clamped by two steel pipes, which is easy to assemble and disassemble.
1. This machine is a kind of swinging action using a rotating drum. The wet powder raw materials can be ground into granules through an iron wire sieve, and it can also be widely used to pulverize the granules into ready-made granules.
2. It is used as a wet-combined powder to grind granules in the chemical industry. After drying, it can be used for compressed tablets. It can also be crushed during storage and agglomerated or agglomerated during chemical processing. It is used industrially to treat confectionery and sugar mixtures and malt milk, etc. In other industries, such as ceramics, plastics and other materials become shaped particles.
3. It is not suitable for semi-solid, fluid, slurry or abrasion.