Finger joint machine is the key equipment for the production of laminated wood. From the point of view of the process flow of the unit, it can be divided into two parts: the milling rubber section and the docking section.
Corresponding to two upper and lower crawler chain drive units with the same structure provided on the top and bottom surfaces of the wood workpiece, bearings are mounted on both ends of the upper chain shaft of the crawler drive unit, and the upper and lower drive contacts The surface is supported by bearings. The tracks on the adjacent sides of the two track-type chain transmissions have the same direction as the wood workpieces. The track-type chain transmission on the lower side is fixed on the platform of the main push mechanism through the sprocket shaft seat. The transmission device is adjustablely connected to the lower crawler chain transmission device through a pressure adjustment device; a horizontal pressure adjustment airbag device is also provided on the side of the material guide plate; on the table surface of the damping mechanism, above the wood workpiece and one of the damping plate Side and side are also provided with longitudinal and horizontal pressure adjustment airbag devices.
Manual and automatic combing machine is mainly used for splicing comb tenon of medium and short wood, such as the production of blockboard, transport veneer board, pillar, furniture, etc. It is used to increase the utilization rate of wood, so that longitudinal glue can be combined to make long size. The ideal processing equipment for specifications. This machine is improved according to the advanced models of the domestic woodworking machinery market. It uses linear guides, precision bearings and linear bearings. It has the advantages of compact structure, no frost, low power consumption, high accuracy, large table area, and long life . Among them, the automatic type is equipped with pneumatic clamping, automatic stop and automatic return functions. It is equipped with a motor overheating automatic protector and an emergency stop switch. The cylinder can be automatically locked after an emergency stop. The docking operation of round wood can improve the working efficiency by more than 40% compared with similar products.