Insulation Material:PVC Application:Industrial Conductor Material:Copper Jacket:PTFE Max maintain exposure Temp.:+120℃(249℉) Max intermittent exposure Temp.:+200℃(392℉) Minimum installation temperature:-40℃(-40℉) Color:Red or custom Outjacket:Thermoplastic,Fluoropolymer
High-temperature cables are cables made of multiple strands of soft copper conductor. Heat and high temperature wires and cables are generally determined by two needs. The first is that the temperature of the wire and cable is high, and the cable can normally transmit signals or electrical energy at high temperatures for a long time; the other is a power transmission cable, which is mainly for increasing the current interception capability.
1.Energy efficient automatically varies its power output in response to pipe temperature changes.
2.Easy to install, can be cut to any length (up to max circuit length) required on site with no wasted cable.
3.Lower installed cost than steam tracing, less maintenance expense and less downtime.
4.No overheat or burnout even when wrapped over itself (overlapped).
5.Suitable for use in non-hazardous, hazardous and corrosive environments.
6.High quality power connection, splice, tee and end seal kit will reduce installation time.
High-temperature cables can work normally and stably under the rated high temperature, and the signal or power transmission performance is not affected, and the cables have a longer service life.
The load-increasing high-temperature cable is mainly developed to reduce the outer diameter and weight of the cable under the premise of current carrying, and to develop lightweight. Generally, the higher the operating temperature of a cable, the larger the current carrying capacity of a cable of the same cross section. In the case of airplanes and automobiles, the significance of weight reduction is considerable, and the cross section is greatly reduced by using high-temperature cables. When the operating temperature is increased from 90 ° C to 155 ° C, the current carrying capacity will increase by 50%. At the same current carrying capacity, the weight of the cable should be reduced by half and the cost also reduced. Of course, at the same time of high current interception, the power loss of most insulating materials will also increase.
Conductor material: multiple strands of soft copper conductor; Insulation material: fluorine plastic insulation, temperature range -60-260 degrees; Filling material: glass fiber; Sheath material: fluorine plastic sheath, temperature range -60-260 degrees.
It is used in industries related to heat and high temperature such as petrochemical, steel, aerospace, shipbuilding, military, pharmaceutical, food, plastic machinery, boiler and so on.