A lead plate filled with sponge-shaped lead is used as a negative electrode, a lead plate filled with lead dioxide is used as a positive electrode, and 22% to 28% dilute sulfuric acid is used as an electrolyte.
• Nominal Voltage from 12V (6 Cells) to 16V (8 Cells)
• Cycle Life ≥ 600 cycles @ 80% DOD
• Float Charge Voltage: 2.25V/Cell – 2.30V/Cell
• Equalization Charge Voltage: 2.44V/Cell – 2.46V/Cell
• Low Discharge Rate ≤ 3%
• Container Material: ABS
The function of starting lead-acid battery is to start and supply power. It uses a lead plate filled with sponge-shaped lead as the negative electrode, a lead plate filled with lead dioxide as the positive electrode, and 22% -28% dilute sulfuric acid as the electrolyte. Its structure is generally composed of 6 single-cell batteries in series. The standard voltage of each single-cell battery is 2v. The battery is mainly composed of a plate group composed of positive and negative plates, a separator, an electrolyte, a casing chain, and a pole pile.
1.Non-Cadmium Design, Environment-friendly: It helps to save energy 28.5%, save water 90%, and non-discharge of waste water.
2.Super Long Mileage: Special active additives have been added in the positive plate to improve the consistency of the formated active material after formation. This has been obviously improved the battery’s charge/discharge efficiency, and more power can be released during discharging. The mileage of each discharge is improved significantly.
3.Strong Motive Power: Super thin plate design is adopted to increase the area of electrochemical reaction, which enables the battery has excellent large current discharge ability. Adopting cast-welding process to reduce the battery’s internal resistance, so the battery’s charge/discharge efficiency is improved to enable battery with large power discharge capability.
4.Long Service Life: The battery has excellent cycle life which can reach 600 cycles @ 80% DOD. The batteries are well grouped to improve the battery bank’s consistency in order to improve the battery bank’s service life.
5.Non-Spillable and High Safety: The battery container and lid are made of Enhanced ABS material and they are sealed by epoxy resin, so the battery is well sealed without any acid leakage issue. High accuracy safety valve has been applied to prevent battery bulging, and safety valve and acid filter are used for preventing sparks splashed into battery to ensure the safety use of battery.
6.High Reliability: Improved negative material prescription and increased micropoles structure at negative helps to improve a lot on charge/discharge performance at extreme temperature condition. Low water loss rate, high temperature resistance, and battery deformation resistance.
1.High life
2.Long Life
3.High CCA and good starting performance
4.Good charging acceptance and vibration resistant performance
5.Application of advanced PE type separator
6.Application of CBB technology
7.Advanced sulfate-resistant technology
8.Advanced calcium lead alloy technology,maintenance -free design.
9.Reliable Labyrinth-like seal design
10.Lead alloy terminal apply heavy load
11.full ranges models,good appearance and high standard design.