“A”
The dry-charge battery is not added with electrolyte when it leaves the factory, and only when it is used. Its life begins. Because there is no electrolyte added before use, it is called dry charge. Except for maintenance-free batteries (sedans) in cars, they are all dry-charged batteries.
The dry-charge battery is not added with electrolyte when it leaves the factory, and only when it is used. Its life begins. Because there is no electrolyte added before use, it is called dry charge. Except for maintenance-free batteries (sedans ) in cars, they are all dry-charged batteries.
1.High capacity
2.Long life
3. High CCA, good starting performance
4. Excellent charge acceptance and vibration resistance
5. Application of AGM technology
6. COS and TTP technology application
7. Advanced anti-sulfation technology
8. Advanced lead-calcium alloy technology, maintenance-free design
9. Reliable anti-leakage, valve-controlled seal design
10. Dry load design, long storage period, ready to use
11. Complete model, beautiful and elegant, high standard design
1. The battery is not used for a long time, and it will slowly discharge itself until it is scrapped. Therefore, the car should be started at regular intervals to charge the battery. Another method is to unplug the two electrodes on the battery. Pay attention to unplug the positive and negative electrode wires from the electrode column. Unplug the negative wire first or remove the connection between the negative electrode and the chassis of the car. Then unplug the other end with the positive sign (+). The battery has a certain service life and will be replaced at a certain period. The same order should be followed when replacing, but when the electrode wires are connected, the order is exactly the opposite. Connect the positive electrode first, and then the negative electrode.
2. When the pointer of the ammeter shows that the stored power is insufficient, charge it in time. The storage capacity of the battery can be reflected on the dashboard. Sometimes on the road, it is found that the power is not enough, and the engine cannot be turned off. As a temporary measure, you can ask other vehicles for assistance. Use the batteries on them to start the vehicle. .
3． The density of the electrolyte should be adjusted accordingly according to different regions and seasons.
4． When the electrolyte is deficient, distilled water or special rehydration fluid should be added. Never use pure drinking water instead. Because purified water contains a variety of trace elements, it will cause adverse effects on the battery.
5． When starting a car, the uninterrupted use of the starter causes the battery to be damaged due to over-discharge. The correct way to use it is that the total time for starting the car does not exceed 5 seconds, and the restart interval is not less than 15 seconds. In the case of multiple starts and still not in the car, you should find the cause from other aspects such as the circuit, ignition coil or oil circuit.
6. When driving daily, you should always check whether the small holes in the battery cover are ventilated. If the small holes in the battery cover are blocked, the generated hydrogen and oxygen cannot be discharged. When the electrolyte swells, it will break the battery case and affect the battery life.
7. Check the battery’s positive and negative levels for signs of oxidation. You can use hot water to pour the battery’s wire connection from time to time, clean it with a copper wire brush, and coat it with butter.
8. Check all parts of the circuit for aging or short circuits. Prevents early retirement of batteries due to excessive discharge.
9. Storage batteries are not allowed to be stored without electricity. If they are used for a few days and then recharged, the plates are prone to sulfate and the capacity is reduced.
10． Periodic inspection: Periodically measure the voltage of a single battery. If the voltage of one of the batteries is lower than 10.5V, you should check or repair it at a service station to avoid damaging the other two good batteries.
11. Electric bicycles are designed for a load capacity of 75KG. Avoid overweight items. Use pedals to help when starting and uphill.
12. It is normal for the battery capacity in winter to decrease as the temperature decreases. It is normal at 20 ° C. Generally, the capacity is 80% at -10 ° C.
13. Keep the surface of the battery clean for a long time. Do not expose to sunlight when storing the vehicle. Park the vehicle in a cool, ventilated and dry place.
14. The battery must be fully charged when it needs to be stored for a long time, and it is generally replenished every month.
15. When starting, uphill, overloading, and windward, the vehicle is assisted by pedals to avoid large current discharge.
16. Use a special charger when charging, and keep it in a cool and ventilated place to avoid high temperature and humidity.
17. Do not use organic solvents to clean the battery case.
18. Do not short the positive and negative terminals of the battery to avoid danger.
19. Prohibition of over-discharge: When the red under-voltage indicator on the instrument panel glows, it indicates that the electricity has entered the starvation zone and should be charged in time.
20. Overcharging is prohibited: The charging time should be different according to the mileage. The longer the mileage, the longer the charging time, and vice versa.
21. If the battery pack fails, please send it to the manufacturer’s authorized department or the relevant organization for proper disposal. Please do not discard it at will to cause environmental pollution.