Good product, good way

Truck oil filter

The full name of machine filter is oil filter, which is used to remove impurities such as dust, metal particles, carbon deposits and soot particles in engine oil, and protect the engine.

 Materials

Filter Paper

Description

Warranty:Six Months
Quality:High-Quality

Function:Filtrate oil
Filtering Effect:>=99.99%

Definition

Truck oil filter, also known as oil grid. Used to remove impurities such as dust, metal particles, carbon deposits and soot particles in engine oil, and protect the engine.

Features

● Filter paper: The oil filter has higher requirements for the filter paper than the air filter, mainly because the temperature of the oil varies from 0 to 300 degrees. Under the sudden temperature change, the oil concentration also changes accordingly. Will affect the filtering flow of the oil. The filter paper of a high-quality oil filter should be able to filter impurities under drastic temperature changes while ensuring sufficient flow.

● Rubber sealing ring: The filter sealing ring of high-quality engine oil is made of special rubber to ensure 100% oil-free.

● Backflow suppression valve: Only available in high-quality oil filters. When the engine stalls, it prevents the oil filter from drying out; when the engine is reignited, it immediately generates pressure and supplies oil to lubricate the engine. (Also known as check valve)

● Relief valve: Only available in high-quality oil filters. When the external temperature drops to a certain value or when the oil filter exceeds its normal service life, the relief valve opens under a special pressure, allowing unfiltered oil to flow directly into the engine. In spite of this, the impurities in the oil will enter the engine together, but the damage is much smaller than the damage caused by the absence of the engine oil. Therefore, the relief valve is the key to protecting the engine in emergency situations.

Function and characteristic

Truck oil filters Designed to protect your engine from dangerous contaminants, an oil filter is a vital component. Our range includes replacements for all types of car.Unfiltered oil can, over time, develop hard and harmful particles, and the last thing you want is for them to pass through an old or broken oil filter, inflicting lasting damage on your engine. It is recommend that you change your oil filter every 5,000 miles

The full name of machine filter is oil filter, which is used to remove impurities such as dust, metal particles, carbon deposits and soot particles in engine oil, and protect the engine. Generally, the engine lubricating system is equipped with several filters with different capabilities: a collector, a coarse filter and a fine filter, which are respectively connected in parallel or in series in the main oil passage of the engine.

Replacement steps

1.Warm-up engine
2. Open the engine filler cap.
3. After lifting the vehicle, remove the engine guard, remove the oil pan drain screw, and drain the old oil.
4. Lower the vehicle and remove the old oil filter.
5. Unpack the new oil filter, apply an appropriate amount of new oil to the seal ring, wipe the oil and dirt from the filter joint area with a clean cloth, screw in the new filter, and filter with an appropriate oil The cleaner wrench is tightened with a certain amount of torque, and the appearance and joints of the new filter are cleaned.
6. Screw on the oil draining screw, lower the vehicle, fill with new oil, check the oil level, start the vehicle at idle and medium speed for a while, pay attention to observe whether the oil filter is leaking, and complete the operation after everything is normal.

Applicable models

Car Model:For Diesel Engine Trucks, Truck

Image

 

 

 

Product knowledge

No Related Product knowledge!

Good Methods

No Related Good Methods!

Contact message