Natural Rubber+Metal
Edge protection cover Boneless blade U-shape interface German high-carbon steel frame Natural rubber strip Type:Wiper Blade Application:99% car model Warranty:6 Months Material:ABS and Natural Rubber Hook:Match U-hook Color:Black
Mixing Power wiper refers to the sheet structure installed in front of the windshield. It consists of a motor, a reducer, a four-link mechanism, a wiper arm spindle, and a wiper blade assembly. Its main function is to wipe the windshield. Rain and snow and dust obstructing sight.
1.Denso type hybrid wiper blade;
2.Top performance.
3. Both ends of the card cover fixed tape,rubber refill will not fall off.
4.SPSN process tape, to extend the service life.
5.High quality steel sheet, good toughness, strong recovery, to ensure the stability of the wiper.
6.Special connector, stable and solid,Easy installation,100% fit.
7.Rubber guid plate：Novelty and elegant,small windage.
8.Special material,more elastic well-propotioned pressure on rubber strip.
9.AA grade material,introduced Germany Double Micro-Edge Technology, Plying-up windshield precisely.
Speaking of wipers, many riders may not care. Wipers are a relatively small component in the total of cars. However, according to international driving safety surveys, when driving in rainy weather, the accident rate caused by aging wiper blades is about 5 times higher than usual. In the rainy season, if your wiper has any problems, you must repair or replace it quickly. There are roughly two types of wiper blades. One is the traditional intermittent type. This is the most common wiper blade. It has three to four segments and is adjusted by the driver according to the rain and sight conditions. The other is a raindrop induction type. , Mostly used on middle and senior models. A good wiper must have the characteristics of heat resistance, cold resistance, acid and alkali resistance, corrosion resistance, ability to fit the windshield, lighten the load on the motor, low noise, strong water repellency, and softness without scratching the windshield. Clear. Maintenance personnel suggest that to ensure your driving safety, it is best to replace the wipers once a year. 1. First find out which type of wiper is used in your car. You can refer to the manual that comes with the car to see the wiper model indicated above. 2. Pay attention to whether the way the pole is connected to the wiper rocker arm matches. Because some of the arms are fixed to the rocker with screws, while others are locked with convex buckles. 3. Pull up the wiper, and touch it on the cleaned rubber wiper with your fingers to check whether there is damage and the elasticity of the rubber blade. If the blade is aged, hardened and cracked, the wiper is unqualified. 4. During the test, place the wiper switch at various speed positions and check whether the wiper maintains a certain speed at different speeds. Especially in the intermittent working state, pay attention to whether the wiper maintains a certain speed during movement. 5. Check the wiper status, and check whether the wiper rod is swinging unevenly or leaking. If the following three situations occur, the wiper is unqualified. First, the swing is not smooth, and the wiper blades do not jump properly. Second, the rubber contact surface cannot be completely adhered to the glass surface, resulting in wiping residues. Linear residue. 6. During the test, attention should be paid to the abnormal noise of the motor, especially when the wiper motor “buzzes” and does not rotate. This indicates that there is a place where the mechanical transmission part of the wiper is rusted or stuck. At this time, the wiper switch should be turned off immediately to prevent the motor from being burned. 7. Some people think that the longer the wiper blade is, the larger the brush area is, and the better the vision is. In fact, the wiper blade is not as long as possible. Although lengthening the wiper blade length can increase the visible range of the field of vision, it will also increase the load on the wiper motor and wiper rod. Of course, lengthening is certainly possible, but it must be ensured that it must not hinder the normal operation of the wiper.