Rubber:100% natural rubbber coated with graphite+Metal
Type:Wiper Blade Spine:High carbon steel electrophoresed Driving Mode:LHD & RHD Basement:Zinc Alloy Applicable Wiper arms:U-hook, J-Hook, Pin arms, Bayonet arms,Screw arms Structure:OE EXACT FIT WIPER BLADE
Front windshield wipers, also known as wipers, wipers, wipers or windshield wipers, are devices used to wipe off raindrops and dust attached to the windshield of vehicles to improve driver visibility To increase driving safety. Because of legal requirements, cars are equipped with wipers almost everywhere.
1. OE-style blade and clip for perfect fit on your vehicles
2. 1500+ pressure points for continuous contact across the windshield
3. Evenly Spaced Contact Points – applies even pressure across the wiping edge for unparalleled stability and performance.
4. 100% natural rubber with Japanese formula offering longer life, excellent wiping performance, anti-heat, anti-cold, can work in different climate of the world.
5.Rubber surface with graphite treatment, resist ultraviolet,radiation and works in noiseless, long life condition.
6.High-carbon steel plate with good rebound character and anti-rust.
7.The latest wind pressure design, which can reduce the noise and wind movement and make scrap more stable when the car in high speed.
The front windshield wiper is an important safety component. It must be able to effectively remove rain, snow and dirt; it can work at high temperature (above 80 degrees Celsius) and low temperature (minus 30 degrees Celsius. Click here to add a picture to illustrate the degree); Resistant to acid, alkali, salt and other harmful substances; service life reaches 150,000 scraping cycles (passenger cars).
The power source of the wiper is the electric motor, which is the core of the entire wiper system. The quality requirements for wiper motors are quite high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm and worm mechanical part. The function of the worm gear and worm gear is to reduce the speed and increase the torque. The output shaft drives the four-link mechanism. The four-link mechanism changes the continuous rotary motion into a left-right swing motion.
The wiper motor uses a 3-brush structure to facilitate speed changes. The intermittent time is controlled by an intermittent relay, and the wiper wiper is wiped according to a certain period by using the charging and discharging functions of the return switch contacts of the motor and the resistance and capacitance of the relay. The wiper blade of the wiper is a tool to directly remove rain and dirt from the glass. The scraper rubber strip is pressed against the glass surface by the spring strip, and its lips must match the angle of the glass to achieve the required performance.
The correct use of wipers is not only to extend the life of the wipers (a wiper is worth a few bucks). The key is to effectively maintain a good line of sight, which is more conducive to driving safety.