Good product, good way

Forged G80 shortening clevis grab hook

Product Description

1. Forged super alloy steel-Quenched and Tempered.

2. Suitable for EN818-2 G80 Chain.

3. Individually proof test at 2.5 times Working Load Limit.

4. Fatiuge tested at 1.5 times Working Load Limited for 20000 cycles.

5. Breaking Test.

6.100% magnaflux crack detection.

7.All load pins are 100% individually inspected and tested.

8.Surface finish: Powder plastified.

9. Colour code: Red RAL3020 /Yellow RAL1003.

10. Ultimate load is 4 times of the Working Load Limited.

11.Above Working Load Limit is based on side pull.

12. Regular mark:Size+FM+Batch Number.

1.Material:PREMIUM ALLOY STEEL OR STAINLESS STEEL
•2.Size:6mm-26mm
•3.Surface:HOT DIP GALVANIZED, COLOR PAINTED, SELF     COLORED
•4.Type:g80 clevis grab hook

•5.WLL :1.12 TON ~ 21.2 TON

•SAFETY FACTOR:4 TIMES OF WLL

• this products is used for lifting, pullling and other usages.

1) Before each use, the operator must perform a safety inspection on the sling and use it only after being qualified;

2) The sling must be inspected regularly by professionals (trained qualified personnel) every month;

3) If it is found that the dimensional wear of the sling is greater than 5% of the original size, it must be replaced in time;

4) If it is found that the amount of dimensional deformation exceeds 3% of the original size, it must be replaced in time to ensure safety.

Related Products

No Related Products!

Product knowledge

No Related Product knowledge!

Good Methods

No Related Good Methods!

Contact message