Good product, good way

Auto Radiator

The radiator belongs to the automobile cooling system. The radiator in the engine water cooling system is composed of three parts: the water inlet chamber, the water outlet chamber, the main piece and the radiator core.

Definitions and materials

The radiator belongs to the automobile cooling system. The radiator in the engine water cooling system is composed of three parts: the water inlet chamber, the water outlet chamber, the main piece and the radiator core.

The cooling fluid flows inside the radiator core, and air passes outside the radiator core. The hot coolant becomes cold due to heat dissipation to the air, and the cold air heats up by absorbing the heat emitted by the coolant, so the radiator is a heat exchanger.

Classification

There are two main types of automobile radiators: aluminum and copper. The former is used for general passenger cars and the latter is used for large commercial vehicles.

Function and characteristics

The hose of the engine radiator will be aged for a long time, it will easily break, water will easily enter the radiator, the hose will break during driving, and the hot water sprayed out will form a large mass of water vapor, which will be ejected from the engine cover and occur. In this case, you should immediately choose a safe place to park and then take emergency measures to resolve it.

In general, when the radiator enters the water, the joint of the hose is the most prone to cracks and leaks. At this time, you can cut off the damaged part with scissors, and then reinsert the hose into the radiator inlet joint, and use a clip or The wire snapped. If the crack is in the middle of the hose, you can use tape to wrap the leaky crack. Wipe the hose clean before tangling. After the leaking part is dry, wrap the tape around the hose leak. Due to the water in the hose when the engine is working, The pressure is high, so try to wrap the tape tightly. If you do not have adhesive tape on hand, you can also wrap the plastic paper around the crack first, and then cut the old cloth into a strip and wrap it around the hose. Sometimes the hose has a large crack, and water may still leak after tangling. At this time, the water tank cover can be opened to reduce the pressure in the water channel and reduce leakage.

After taking the above measures, the engine speed should not be too fast, you should try to hang high-end driving, pay attention to the position of the pointer of the water temperature meter during driving, and stop to cool down or add cooling water when the water temperature is too high.

Image

 

 

Product knowledge

No Related Product knowledge!

Good Methods

No Related Good Methods!

Contact message