How to prevent the chain hoist hook from deformation?

The chain hoist is a lifting tool that is driven by human power through a handle to drive the chain to move the picking device. If you want to use the chain hoist safely, you must ensure that the hook of the hand hoist does not become larger to ensure safety during the use of the equipment.

Methods to prevent the chain hoist hooks from deformation:

1. Ensure that the weight of the lifting weight is within the range that the hoist. Before using the device, check the weight of the object and whether it is within the range of the device, so as to ensure that the hook is not pulled.
2. Do not use equipment to lift heavy loads diagonally. Inclined pulling of heavy objects will not only hurt the chain, but also cause the hook to receive greater pulling force, which is one of the reasons for the increase in the opening.
3. Do not use equipment to pull underground objects. The weight of an object buried in the ground cannot be measured, and the tensile force of the hook that hangs the heavy object cannot be measured. It may be overloaded, and it is also a factor that causes the opening to increase.
4. Do not allow heavy objects to hang on the device for a long time. Hanging heavy objects on the device for a long time will cause component fatigue, such as fatigue of the lower hook. Even if it does not suddenly break, it will deform it and increase the opening.

If you encounter a similar situation when using the chain handle to pull the hoist, please correct it in time. Because irregular operation methods will greatly reduce the service life of the equipment, it will also reduce the safety of lifting work, and it is prone to accidents.